Clean and dry the area you wish to apply the vinyl to.
Position the vinyl where you wish it to go.
Briefly secure the vinyl with tape. *1
Once you are happy with where it is take a strip of tape down the center of the vinyl *2
Lift up the left side, remove the backing paper and then carefully press it back from right to left not allowing any creases or bubbles. *3
Remove the tape and then lift up the right side, remove the backing paper and then carefully press it back from left to right once again not allowing any creases or bubbles. *4
Now just to make sure rub all over the transfer making sure all edges and points are applied well and make sure there are no air bubbles. Make sure you pay more attention to the vinyl pattern rather then the area where there is no vinyl. Then carefully peal off the backing paper slowly back upon itself helping any corner that tries to stick to the backing.